ULCC2Component: LCC2 Pipeline Component

Component specific to the LCC2 pipeline, inheriting ULCCComponentBase. It adds spherical harmonics band control, a lighting normal system, and depth threshold control.

#include "LCC2Component.h"

Get the instance:

ULCC2Component* Comp = Cast<ULCC2Component>(LCC2Actor->GetLCCComponent());

This component serves four data formats at once: the LCC2 directory, .sog, .spz, and .ply. The latter three reuse the same rendering pipeline by constructing virtual metadata, so the Component obtained is always ULCC2Component.

Note: the multi-viewport interfaces on the base class (SetPlayerLoadMode, SetPlayerRenderMode, SetSceneCaptureLoadMode, SetSceneCaptureRenderMode, ModifyPlayerTransform, CancelModifyPlayerTransform) do not apply to the LCC2 pipeline; calls raise no error but do not produce the expected result. See ULCCComponent for details.

Properties

The normal properties carry EditConditionHides, so the Details panel only shows the items the current NormalMode uses.

Two more differences from the base class:

• MetaInfo (of type FLCC2MetaInfo) is a private member, not accessible from outside on the C++ side and only visible to Blueprint (read-only in the Details panel). In C++ use GetMetaInfo2 to read the complete fields.
• Construction rewrites the full load setting of Performance to "checkbox enabled, value false", the opposite of the FRenderInfo default. In other words, LCC2 does not use full load rendering by default and it has to be enabled explicitly when needed.

Spherical Harmonics

SetSHBands / GetSHBands

UFUNCTION(BlueprintCallable, Category = "XGrids")
void SetSHBands(int32 InSHBands);

UFUNCTION(BlueprintPure, Category = "XGrids")
int32 GetSHBands() const;

Sets how many spherical harmonics bands take part in the calculation, from 1 to 3. It applies to every format this component renders, including LCC2, SOG, SPZ, and PLY.

Usage notes:

• The default comes from the loaded data and is also the upper limit. Setting 3 on data that stores only 2 bands adds nothing.
• Compared with turning spherical harmonics off entirely through SetUseShcoef(false), lowering the band count is a finer trade-off.
• It requires bUseShcoef to be enabled and the render mode to be 3DGS, otherwise the value does not take part in the calculation.
• For the trade-off between quality and cost see Visual Settings - SH Bands.

ULCC2Component* Comp = Cast<ULCC2Component>(Actor->GetLCCComponent());
if (Comp)
{
    // drop to 2 bands on mid-range devices
    Comp->SetSHBands(2);
}

Configuring by quality tier:

void ConfigureSH(ULCC2Component* Comp, EQualityTier Tier)
{
    if (!Comp || !Comp->CanSetShcoef())
    {
        return;   // the data itself has no spherical harmonics, nothing to do
    }

    switch (Tier)
    {
    case EQualityTier::High:
        Comp->SetUseShcoef(true);
        Comp->SetSHBands(3);
        break;
    case EQualityTier::Medium:
        Comp->SetUseShcoef(true);
        Comp->SetSHBands(2);
        break;
    case EQualityTier::Low:
        Comp->SetUseShcoef(false);   // turn it off entirely
        break;
    }
}

Lighting

LightingScale

UPROPERTY(Interp, EditAnywhere, BlueprintReadWrite, Category = "XGrids|Lighting",
    meta = (UIMin = "0.0", UIMax = "1.0", ClampMin = "0.0", ClampMax = "1.0"))
float LightingScale = 0.0f;

Base color brightness of 3DGS before scene lighting is applied, from 0 to 1, default 0. 0 means fully driven by scene lighting, 1 means the full original brightness is kept.

For the effect of the value and how to tune it, see Normals and Lighting - LCC2 Lighting Scale.

Usage notes:

• Only meaningful while LightMode is Lit; it has no effect under Unlit.
• It is a BlueprintReadWrite property, assigned directly, with no Setter function.
• Marked Interp, so it can be keyframed in Sequencer for day-night changes.

Comp->SetLightMode(ELightMode::Lit);
Comp->LightingScale = 0.3f;    // keep 30% of the original brightness, the rest from scene light

NormalMode

UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "XGrids|Lighting")
ELCC2NormalGenerationMode NormalMode = ELCC2NormalGenerationMode::Fixed;

Controls how the 3DGS surface responds to scene lighting. 3DGS data itself has no geometric normals, and the first three modes construct normals through approximation; only ProxyMesh provides real normals.

For a comparison of the four modes, their use cases, and how to tune them, see Normals and Lighting; for the value definitions see Enums.

// Fixed mode, normal pointing up
Comp->NormalMode = ELCC2NormalGenerationMode::Fixed;
Comp->FixedNormal = FVector(0.0, 0.0, 1.0);

// Hemispherical mode, adjusting the direction the light sweeps and the contrast
Comp->NormalMode = ELCC2NormalGenerationMode::Hemispherical;
Comp->NormalPole = FVector(1.0, 0.0, 1.0);
Comp->NormalHemiSpread = 1.2f;

FixedNormal

UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "XGrids|Lighting",
    meta = (EditCondition = "NormalMode == ELCC2NormalGenerationMode::Fixed", EditConditionHides))
FVector FixedNormal = FVector(0.0, 0.0, 1.0);

Fixed mode only. World-space normal shared by the whole 3DGS, pointing up by default. Normalization is not required.

Usage notes:

• One normal shared by everything means the brightness of everything is a single value, equal to dot(normal, light direction).
• Light arriving from behind the normal darkens everything, possibly to black. In an outdoor scene with the normal pointing up and the light source above, this is usually fine.
• When the main subject of the scene is a wall, setting the normal to the wall orientation is more reasonable.

NormalPole

UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "XGrids|Lighting",
    meta = (EditCondition = "NormalMode == ELCC2NormalGenerationMode::Hemispherical", EditConditionHides))
FVector NormalPole = FVector(1.0, 0.0, 1.0);

Hemispherical mode only. The direction the surface is treated as facing, which decides how the shading boundary moves across the 3DGS as the directional light rotates. Normalization is not required.

How to tune it: place the directional light first, then adjust this vector and watch whether the direction of the shading boundary matches expectations.

NormalHemiSpread

UPROPERTY(EditAnywhere, BlueprintReadWrite, Category = "XGrids|Lighting",
    meta = (UIMin = "0.0", UIMax = "4.0", ClampMin = "0.0",
        EditCondition = "NormalMode == ELCC2NormalGenerationMode::Hemispherical", EditConditionHides))
float NormalHemiSpread = 0.5f;

Hemispherical mode only. Strength of the shading variation across the surface, from 0 to 4, default 0.5.

A smaller value makes the shading flatter and more even; a larger value makes the contrast between the lit and shadowed areas stronger.

AlphaThreshold

UPROPERTY(Interp, EditAnywhere, BlueprintReadWrite, Category = "XGrids", AdvancedDisplay,
    meta = (UIMin = "0.01", UIMax = "0.99", ClampMin = "0.01", ClampMax = "0.99"))
float AlphaThreshold = 0.5f;

Accumulated opacity threshold for the median depth decision, from 0.01 to 0.99, default 0.5. An advanced item.

Opacity accumulates from near to far, and when the accumulated value reaches this threshold the current depth is recorded as the representative depth of that pixel. A smaller value biases the depth toward the camera side, a larger value toward the far side.

It affects occlusion between 3DGS and traditional meshes, shadow casting, and post-processing. The default suits most cases; for a description of the values see Visual Settings - Depth Threshold.

GetEffectiveNormalGenerationMode

UFUNCTION(BlueprintPure, Category = "XGrids")
ELCC2NormalGenerationMode GetEffectiveNormalGenerationMode() const;

Returns the normal mode actually in effect after license validation.

Return value: the original value of NormalMode when licensed; Fixed when the license-restricted ProxyMesh is selected without a license.

Usage notes:

• The stored NormalMode property is not modified; only rendering follows the downgraded mode. Reading NormalMode and reading this function may therefore disagree.
• Use it for UI messaging. When the user selected ProxyMesh but Fixed is what actually runs, the interface should say so.

const ELCC2NormalGenerationMode Requested = Comp->NormalMode;
const ELCC2NormalGenerationMode Effective = Comp->GetEffectiveNormalGenerationMode();

if (Requested != Effective)
{
    UE_LOG(LogTemp, Warning,
        TEXT("ProxyMesh mode requires a license, fell back to Fixed"));
}

Blueprint as text:

[Get Effective Normal Generation Mode]
        Target = (LCC2 Component)
        │ Return Value ──┐
        ▼                │
[Equal (Enum)] ◀─────────┘
        A = (Return Value)
        B = Proxy Mesh
        │
        ▼
[Branch]
        │ False
        ▼
[Print String]  In String = "ProxyMesh requires a license, fell back to Fixed"

Other Methods

GetMetaInfo2

FLCC2MetaInfo GetMetaInfo2();

Returns the complete LCC2 metadata. C++ only.

Compared with GetMetaInfo() on the base class, it adds the work path, data source type, spherical harmonics bands, octree root node, file list, and more. For the fields see Structs.

GetLccVersion

virtual ELCCVersion GetLccVersion() const override;

Always returns ELCCVersion::LCC2.

See Also

• Normals and Lighting: full description of the normal modes and lighting scale
• Visual Settings: values for SH bands, depth threshold, and other parameters
• ULCCComponentBase: common rendering and performance interfaces
• ALCC2ProxyMesh: the companion Actor of the ProxyMesh normal mode
• SOG / SPZ / PLY Actors: these three formats use this component too
• Enums: normal mode values